Home Inspection

Is It Possible To Break Disposal Blades?


So, let's hear an answer - is it possible to break disposal blades?

Disposal blades are called "impeller blades."

They are designed in different shapes to attempt to cut and chop debris in the disposal.

The smaller it is chopped, the easier it is to wash away.  The larger the motor (builder size 1/3 horsepower - my disposal 3/4 horsepower) the better the chop, slice and dice.

However, no blade-o, no chop-o.  That's perfect Spanish. Turning on this disposal it sounded funny.

It's important to listen to the sounds of appliances as they operate, and as you use them or maintain them!

That way you will know when things just don't seem right.

I listen to lots of disposals!

Turning this one on it did not have that clinking, grind sound I am so familiar with.

It sounded more like a jet engine, with a high-spinning whir, but none of the familiar clinking of the blades turning in an empty disposal.

And looking inside I could see why.

It was an old disposal and seriously rusty.

THE BLADES WERE GONE!

I don't know that I've ever seen that, and I have peeked into lots and lots of disposals!

Here are some DON'TS when operating disposals.  DON'T put this into your disposal:

  • Large items - if you have large food chunks you should cut them up a bit
  • Hard items, like bones.  You mean chicken wings don't sharpen the disposal impeller blades?  NO!
  • Grease
  • Coffee grinds
  • Starchy stuff, which will further swell and clog the pipes
  • Stringy vegetables like celery and rhubarb
  • Fruit and vegetable skins (except citrus)
  • Bleach, which will ruin the seals and can splatter back into your face
  • Unpopped popcorn kernels!
  • Common sense things, like coins, metal screws, plastic bottle caps, plastic cooking wrap or sandwich bags (I've seen all this!)
  • Rags, paper towels or paper
  • Your hand - UNLESS YOU ARE CERTAIN THE UNIT CANNOT COME ON!

Is it possible to sharpen the disposal impeller blades?

YES!

With ice.  Lots of ice.  And do it a couple of times a month.  Run cold water at the same time as the unit is grinding up the ice.

Grinding this ice will do something more.  Ice will harden any greasy deposits inside the unit and that will help to wash them away.

Is it possible to clean the disposal and get rid of odors?

YES!

Grinding bunches of lemon and other citrus peels will help a lot!  And their oils linger to help eliminate smells.

Also, baking soda and white vinegar - 5 tablespoons of each.  Let it bubble up and sit for a while, preferably overnight.

Also, Borax and water.  Again, 5 tablespoons of each, letting it also do its magic and sit overnight.

I assure you that home inspectors' disposals smell just as bad as yours.  This home inspector sharpens and then deodorizes his disposal monthly.  He also has a big one - 3/4 horsepower, purchased on sale for less than $100 and he never looked back.

My recommendation:  be smart!  Disposal blades can break in any state, like these impellers in Herndon VA.  Be careful what you put down the disposal!  If it gets stuck it can be loosened from below with an Allen wrench (they come now with the special wrench) or from above with a broom handle stuck down inside and turned clockwise.  They aren't magic!  But treated well a disposal will last a good while, even 10 or more years.*

*  The old adage - if it ain't broke don't fix it sometimes applies, but not always.  A few years ago we put in granite counter tops and the disposal was working fine, but was 10 years old.  I decided to replace it even though it looked and sounded good.  Why not?  Everything under the sink was torn apart and removed anyway to accommodate all the new stuff.  And it was on sale!

If you need to buy a new disposal, remember, the more horsepower the better.  Your builder probably put in a 1/3 horsepower unit.  If you want to upgrade I would recommend a 1/2 horsepower minimum.  A link to a good brand can be found here.  In my house we have a 3/4 horsepower, and it's very powerful.  It's lasted a long time too.  A good-quality 3/4 horsepower unit can be purchased here.


So, let's hear an answer - is it possible to break disposal blades?

Disposal blades are called "impeller blades."

They are designed in different shapes to attempt to cut and chop debris in the disposal.

The smaller it is chopped, the easier it is to wash away.  The larger the motor (builder size 1/3 horsepower - my disposal 3/4 horsepower) the better the chop, slice and dice.

However, no blade-o, no chop-o.  That's perfect Spanish.

Turning on this disposal it sounded funny.

It's important to listen to the sounds of appliances as they operate, and as you use them or maintain them!

That way you will know when things just don't seem right.

I listen to lots of disposals!

Turning this one on it did not have that clinking, grind sound I am so familiar with.

It sounded more like a jet engine, with a high-spinning whir, but none of the familiar clinking of the blades turning in an empty disposal.

And looking inside I could see why.

It was an old disposal and seriously rusty.

THE BLADES WERE GONE!

I don't know that I've ever seen that, and I have peeked into lots and lots of disposals!

Here are some DON'TS when operating disposals.  DON'T put this into your disposal:

  • Large items - if you have large food chunks you should cut them up a bit
  • Hard items, like bones.  You mean chicken wings don't sharpen the disposal impeller blades?  NO!
  • Grease
  • Coffee grinds
  • Starchy stuff, which will further swell and clog the pipes
  • Stringy vegetables like celery and rhubarb
  • Fruit and vegetable skins (except citrus)
  • Bleach, which will ruin the seals and can splatter back into your face
  • Unpopped popcorn kernels!
  • Common sense things, like coins, metal screws, plastic bottle caps, plastic cooking wrap or sandwich bags (I've seen all this!)
  • Rags, paper towels or paper
  • Your hand - UNLESS YOU ARE CERTAIN THE UNIT CANNOT COME ON!

Is it possible to sharpen the disposal impeller blades?

YES!

With ice.  Lots of ice.  And do it a couple of times a month.  Run cold water at the same time as the unit is grinding up the ice.

Grinding this ice will do something more.  Ice will harden any greasy deposits inside the unit and that will help to wash them away.

Is it possible to clean the disposal and get rid of odors?

YES!

Grinding bunches of lemon and other citrus peels will help a lot!  And their oils linger to help eliminate smells.

Also, baking soda and white vinegar - 5 tablespoons of each.  Let it bubble up and sit for a while, preferably overnight.

Also, Borax and water.  Again, 5 tablespoons of each, letting it also do it's magic and sit overnight.

I assure you that home inspectors' disposals smell just as bad as yours.  This home inspector sharpens and then deodorizes his disposal monthly.  He also has a big one - 3/4 horsepower, purchased on sale for less than $100 and he never looked back.

My recommendation:  be smart!  Be careful what you put down the disposal!  If it gets stuck it can be loosened from below with an Allen wrench (they come now with the special wrench) or from above with a broom handle stuck down inside and turned clockwise.  They aren't magic!  But treated well a disposal will last a good while, even 10 or more years.*

 

*  The old adage - if it ain't broke don't fix it sometimes applies, but not always.  A few years ago we put in granite counter tops and the disposal was working fine, but was 10 years old.  I decided to replace it even though it looked and sounded good.  Why not?  Everything under the sink was torn apart and removed anyway to accommodate all the new stuff.  And it was on sale!

- See more at: http://activerain.com/blogsview/4239593/is-it-possible-to-break-disposal-blades-#sthash.uIYnJKmT.dpuf

Protected by Copyscape DMCA Takedown Notice Checker

Jay performs inspections Monday through Saturday, throughout Northern Virginia, from his office in Bristow to Leesburg and Centreville, to Great Falls and Vienna and everywhere in between!

Syndicate content